© youplate.co.uk 2019 For more information, please see site Terms & Conditions -
MAINLAND UK ONLY
MAINLAND UK SUPPLY ONLY -
Unlike many available online, these zinc anodes are not cut from sheet zinc but individually cast from pure, industrial anode zinc. They are approximately 4 mm thick and are far less prone to breakage and rapid decomposition. Can easily be drilled or cut to produce smaller anodes for small tank processes.
Industrial standard nickel anodes, approximately 1” square. Approx 300g of anodes in each pack (Can vary from 5 -
Ideal for any small scale or home elecroplater -
hook approximately 1 1/2".
A replacement bag for the titanium cage listed above. Can be used without the cage and wrapped around anodes. Used to reduce the chances of suspended contamination and helps keep the solution as clean as possible.
Copper wire of the highest quality. Soft and malleable, specifically made for applications such as electroplating, ideal for the high currents attained during process and is a far cry from the cheaper, thinner alternatives from a DIY hardware store! Each length is approximately 6 metres.
Sold in individual lengths of standard cut wire, each length is approximately 25cm long and is of the highest quality titanium, specific for electroplating. Used to suspend anodes in solution (copper will contaminate a solution), each length is strong and ideal for smaller tank solutions.
This Aluminium wire is exactly the same as that sold to large anodising companies around the country. This is of the highest quality and grade and a must for anyone treating Aluminium. Each length is approximately 6 metres.
NEVER accept the alternative! Acid copper solutions MUST use PDO grade copper anodes. This pack of 3 anodes are approximately 25 x 30mm and are industrial standard for acid copper plating. Using ANY other grade will be detrimental to the plating solution and can cause plating issues. Simple suspend using titanium like any other anode.
For use as Cathodes in Anodising and Anodes in Nickel stripping solutions. 3 off lead anode / cathode and each unit is approximately 150mm x 75mm x 2mm
The 3 combined weight between 650g and 700g and can are drilled, ready to use.
Simple and effective -
Unlike many available online, these zinc anodes are not cut from sheet zinc but individually cast from pure, industrial anode zinc. They are approximately 4 mm thick and are far less prone to breakage and rapid decomposition. Can easily be drilled. This item is for 2 anodes. REDUCED £12.00 £10.99
|Zinc Plating Products|
|Zinc Plating User Guide|
|Zinc Plating Process|
|Nickel Plating Products|
|Nickel Plating Salts|
|Bright Nickel Plating|
|Etching and Anodising|